Tape Device Lun Mapping - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual
Brocade fabric os encryption administrator's guide v7.1.0 (53-1002721-01, march 2013)
Hide thumbs
Also See for StoreFabric SN6500B:
- User manual (1505 pages) ,
- Command reference manual (1168 pages) ,
- Reference (934 pages)
Table of Contents
Advertisement
Tape Device LUN Mapping
When performing LUN mapping, ensure that a given LUN number from a backend physical target is
the same across all initiators in the container. Failure to do so can result in unpredictable switch
behavior including blade/switch faults. Use the following command to list the LUNs in the target.
switch:admin> cryptocfg --discoverLUN <container name>
NOTE
It is recommended that you follow the above rule if a given LUN on the backend target is LUN
mapped to different initiators.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
Tape Device LUN Mapping
5
299
Advertisement
Table of Contents
Troubleshooting
