Change Pair Option Operation - HP XP20000/XP24000 Reference Manual

Change Option
Change Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 51 Change Option Operation
Item
Parallel Initial Copy
Path Blockade
Watch(s)
Path Blockade SIM
Watch(s)
Service SIM
Parallel Initial Copy
(CU)
LDKC
CU
Service SIM
PPRC Support
SCP Time(s)
Parallel Initial Copy
(CU)
Num. of CUs

Change Pair Option Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Change Pair Option,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN),Fence Level, Error Level,Result}=
-{1A-0x00-0x000,Never,Group,Normal End},{1A-0x00-0x001,Never,Group,Normal End},
{1A-0x00-0x002,Never,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[Cnt Ac]
HP XP Continuous Access Software function
Change Pair Option
Change Pair Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Description
The maximum number of initial copy operations set. (1 to 512)
The path blockade watch period set. The unit is second.
The path blockade SIM watch period set. The unit is second.
Indicates whether the remote copy related SIM is reported or not.
Report, Not Report
Indicates whether the parallel operation of initial copy by CU is enabled or not.
Enable, Disable
The LDKC number.
The CU number of the connected CU.
Indicates whether to report the remote copy-related SIM.
Report, Not Report
Indicates whether the host supports PPRC.
Yes: support, No: not support
The SCP delay time when the pair is suspended. The unit is second.
The number of parallel operation of initial copy by CU. (1 to 16)
The number of CUs set.
Table 51 (page 67).
Change Pair Option Operation 67