[Cnt Ac-S Z] Function Switch; [Cnt Ac-S Z] Resume Pair; [Cnt Ac-S Z] Script Operation - HP StorageWorks P9000 - Disk Arrays Reference Manual

[Cnt Ac-S Z] Function Switch

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Function Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Switch=0001 0100 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Detailed Information
Item
Switch

[Cnt Ac-S Z] Resume Pair

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Resume Pair,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{M-VOL(LDKC:CU:LDEV),R-VOL(LDEV),Fence Level,Copy Pace,
Priority,TS,Result}
=[{0x00:0x00:0x00,0xFE,Never,15,256,Enable,Normal end},
{0x00:0x00:0x01,0xFF,Never,15,256,Enable,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed Information
Item
M-VOL(LDKC:CU:LDEV)
R-VOL(LDEV)
Fence Level
Copy Pace
Priority
TS
Result
Num. of Pairs

[Cnt Ac-S Z] Script Operation

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Script Operation,Run,Normal end,
156 Audit log examples
Description
Each bit position (on/off) of the function switch information assigned by 64 bits. The
beginning of the string is bit 0 and the ending of it is bit 63. "0" indicates the bit is off,
and "1" indicates the bit is on.
In the example above, bit 3 and bit 5 are on and the other bits are off.
Description
The LDKC, CU, and LDEV numbers of the main volume in the restored pair.
The LDEV number of the remote volume in the restored pair.
The fence level set (the condition that MCU rejects the write operation to the primary
volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
The initial copy speed set (the number of tracks you can copy at a time by restoring).
The priority of the restoring operation set (scheduling order).
Indicates whether or not the host I/O time stamp is transferred to R-VOL when the pair
is restored.
Enable: transferred, Disable: not transferred
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of restored pairs.