[Prov] Set Fcsp Target; [Prov] Set Fibre Address - HP StorageWorks P9000 - Disk Arrays Reference Manual

{3E,Disable,0,unidirectional,2222222222222222}],
Num. of Ports=2
Detailed Information
Item
Port
Switch
DH Group
Auth
UserName
Num. of Ports

[PROV] Set FCSP Target

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set FCSP Target,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,Switch,DH Group,UserName}
=[{1E,0xXXX,Enable,0,1111111111111111},
{3E,0xXXX,Disable,0,2222222222222222}],
Num. of Grps=2
Detailed Information
Item
Port
HostGrpID
Switch
DH Group
UserName
Num. of Grps

[PROV] Set Fibre Address

This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Fibre Address,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fibre Addr.}=[{XX,0xXX(xx)},{XX,0xXX(xx)}],Num. of Ports=2
128 Audit log examples
Description
The name of the port where authentication parameter has been set.
The setting status whether to execute authentication by port.
Disable: Do not authenticate, Enable: Authenticate
Not used. (fixed to 0)
The setting status of authentication method.
bi-directional: bi-directional authentication, unidirectional: unidirectional authentication
The user name of the port.
The number of ports where authentication parameter has been set.
Description
The name of the port that includes the host group where authentication parameter has been
set.
The number of the host group where authentication has been set.
The setting status whether to execute authentication by host group.
Disable: Do not authenticate, Enable: Authenticate
Not used. (fixed to 0)
The user name of the host group.
The number of host groups where authentication parameter has been set.