[Install] Set Devgrpdef; [Install] Set Fibre Address; [Install] Set Fibre Topology - HP StorageWorks P9000 - Disk Arrays Reference Manual

+{LDKC:CU:LDEV,CommandDevSec}=[{0x00:0xXX:0xXX,Disable},
{0x00:0xXX:0xXX,Enable}],Num. of LDEVs=2
Detailed Information
Item
LDKC:CU:LDEV
CommandDevSec
Num. of LDEVs

[Install] Set DevGrpDef

Example
07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set DevGrpDef,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,DevGrpDef}=[{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=1
Detailed Information
Item
LDKC:CU:LDEV
UserAuth
Num. of LDEVs

[Install] Set Fibre Address

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Fibre Address,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fibre Addr.}=[{XX,0xXX(xx)},{XX,0xXX(xx)}],Num. of Ports=2
Detailed Information
Item
Port
Fibre Addr.
Num. of Ports

[Install] Set Fibre Topology

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Fibre Topology,,Normal end,
78 Audit log examples
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device is set.
Indicates whether the command device security setting is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the command device is set.
Description
The LDKC, CU, and LDEV numbers of the volume where the device group definition is specified.
Indicates whether the device group definition is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the device group definition is set.
Description
The name of the port that the fibre address has been set.
The address of Fibre Channel port after the setting.
The outside of parenthesis indicates AL-PA (arbitrated-loop physical address) and the inside of
parenthesis indicates the loop ID.
The number of ports where address has been set.