Stapling Error Detection; Service Status Page Printing - Kyocera TASKalfa 181 Operation Manual

Printing Functions

Stapling Error Detection

You can select whether or not to display Add Staples and Press GO when staples have run out while stapling
is performed.
Setting
On
Off
NOTE:
This setting is displayed only if the optional finisher is installed.
Others
Resource Prot .
Auto Continue
Finishing Error
Finishing Error
Back
Proces. Duplex print
Staple Setting
Staple Setting
Back
On
Off

Service Status Page Printing

The service status page contains more detailed printer setting information than the normal status page. This
page is mainly used by the service personnel for maintenance. Use the following procedure to print this page as
needed.
5-50
• If you select GO, printing is performed without stapling.
• If you select CANCEL, printing is cancelled.
Printing is performed without stapling.
Processing
1
Display the Others screen. (See How to Display the
Others Screen on page 5-45.)
2
Press or
then press the Enter key.
3
Press or
then press the Enter key.
4
Press or
the Enter key.
5
Press the Reset key.
The message display returns to the printer basic
screen.
1
Display the Others screen. (See How to Display the
Others Screen on page 5-45.)
to select Finishing Error, and
to select Staple Setting, and
to select On or Off, and then press
OPERATION GUIDE