Resource Protect Mode - Kyocera TASKalfa 181 Operation Manual

Printer Reset
Back
OK

Resource Protect Mode

The resource protect mode protects the resource data such as downloaded fonts and macros and memorizes
the PCL resources even if the emulation mode is switched. If you select Permanent, temporary resources are
not protected. If you select Perm/Temp, however, temporary resources are also protected.
Others
Print HEX -DUMP
Printer Reset
Resource Prot .
Resource Prot .
Back
Off
Permanent
OPERATION GUIDE
3
Press or to select OK, and then press the
Enter key.
The printer functions are reset.
1
Display the Others screen. (See How to Display the
Others Screen on page 5-45.)
2
Press or to select Resource Prot, and then
press the Enter key.
3
Press or to select Off, Permanent, or
Perm/Temp, and then press the Enter key.
4
Press the Reset key.
The message display returns to the printer basic
screen.
Printing Functions
5
5-47