Other Settings; Form Feed Timeout - Kyocera TASKalfa 181 Operation Manual

Other Settings

You can set the following items for other settings.
•

Form Feed Timeout

• Received Data Dump
• Printer Function Resetting
• Resource Protect Mode
• Auto Continue
• Duplex Printing Error Detection
• Stapling Error Detection
• Service Status Page Printing
How to Display the Others Screen
Ready
GO
CANCEL
MENU
Menu
RAM Disk Mode
Paper Handling
Others
Form Feed Timeout
If this machine does not receive any information indicating the end of data after receiving the last data, the
machine waits for a certain time without printing the last page. When the preset time elapses, the machine
performs automatically a form feed. If you set the time to 0, the machine does not perform a form feed until GO
is manually selected.
Others
Back
Form Feed Time-Out
Print HEX -DUMP
Form Feed Time-Out
30 sec.
OPERATION GUIDE
(0 495)
1
Press the Print key.
2
Press or to select MENU, and then press the
Enter key.
3
Press or to select Others, and then press the
Enter key.
The Others screen is displayed. Next, perform the
setting referring to the following description of each
setting item.
1
Display the Others screen. (See How to Display the
Others Screen on page 5-45.)
2
Press or to select Form Feed Time Out,
and then press the Enter key.
3
Press or to set the time, and then press the
Enter key.
You can set the time to 0 to 495 seconds in 5
second increments.
Printing Functions
5
5-45