Kyocera TASKalfa 181 Operation Manual page 161

Density Adjustment for Photo Originals
Adjust the density of the central value in the manual density mode for photo originals.
Copy Default :
Txt+Photo Dens .
Txt Ori Density
Photo Ori Dnsity
Photo Original Density Adjust :
Collate Copying
If the optional document finisher is installed, select whether or not to set the sort copy mode as a default setting.
NOTE:
This item is displayed only if the optional document processor is installed.
Copy Default :
Txt Ori Density
Photo Ori Dnsity
Collate
Collate:
Off
On
*
OPERATION GUIDE
4
Press the Reset key.
The message display returns to the copier basic
screen.
1
Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2
Press
then press the Enter key.
: 4
: 4
: 4
3
Press
the Enter key.
Moving right darkens the density, and moving left
lightens it.
4
Press the Reset key.
The message display returns to the copier basic
screen.
1
Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2
Press
the Enter key.
: 4
: 4
: On
3
Press
the Enter key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
to select Photo Ori Dnsity, and
or
or to adjust the density, and then press
to select Collate, and then press
or
or to select Off or On, and then press
System Menu
6
6-9