Kyocera TASKalfa 181 Operation Manual page 167

NOTE:
For the 18 ppm model, cassettes 2 to 4 are included in the optional paper feeder. For the 22 ppm
model, cassettes 3 and 4 are included in the optional paper feeder. This setting is displayed only if the optional
paper feeder is installed.
Machine Default :
End
Auto Cassette SW
Paper Size(1st)
Paper Size (1st cassette ):
Auto Detection Metric
*
Auto Detection Inch
Paper Type (cassettes 1 to 4)
Set the paper types of cassettes 1 to 4.
Paper types that can be set: Plain, Preprinted, Bond, Recycled, Rough, Letterhead, Color [Colour],
Prepunched, High quality, Custom 1(to 8)
NOTE:
For the 18 ppm model, cassettes 2 to 4 are included in the optional paper feeder. For the 22 ppm
model, cassettes 3 and 4 are included in the optional paper feeder. This setting is displayed only if the optional
paper feeder is installed.
Machine Default :
Paper Size(3rd)
Paper Size(4th)
Paper Type(1st)
Paper Type (1st cassette ):
Plain
*
Preprinted
Bond
OPERATION GUIDE
1
Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2
Press
set the paper size from Paper Size(1st) to
(4th), and then press the Enter key.
:
On
: Auto M
3
Press
Metric, Auto Detection Inch or a paper size,
and then press the Enter key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
1
Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2
Press
set the paper type from Paper Type(1st) to
:
Auto M
(4th), and then press the Enter key.
:
Auto I
: Plain
3
Press
press the Enter key.
or to select the cassette for which you
to select Auto Detection
or
to select the cassette for which you
or
to select the paper type, and then
or
System Menu
6
6-15