Clearing Staple Jam - Kyocera TASKalfa 181 Operation Manual

Clearing Staple Jam

Appendix-6
4
While holding the staple holder with one hand and
the new staple cartridge with the other hand, insert
the cartridge into the holder with care about the
direction.
NOTE:
The arrow on the staple cartridge indicates the
insertion direction.
5
Push the staple cartridge all the way into the holder
and remove the paper tape around the staple
cartridge by pulling it.
6
Insert the staple holder into the insertion slot as it
was. Insert it completely until it clicks.
7
Close the stapler front cover.
1
Remove the staple holder in the same way as
described in Adding Staples.
A
Hold knob A of the face plate of the staple holder
with your fingers and raise the plate.
OPERATION GUIDE