Kyocera TASKalfa 181 Operation Manual page 164

System Menu
Copy Limit:
# keys
Black Streaking Reduction Processing
If black streaks (streaks that are not contained in the original image) appear on copies from the optional
document processor, you can make black streaking less noticeable. Since the black streaking reduction
processing reduces the reproducibility of fine characters, it is normally recommended to use the factory default
setting.
Copy Default :
BorderEraseWidth
Copy Limit
Corr. Black Line
Correct. Fine black line :
None
*
Weak
Strong
6-12
999 Sets
: 1/4"
: 999 Set
: None
3
Enter the maximum number of copies (1 to 999)
using the numeric keys, and then press the Enter
key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
1
Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2.)
2
Press or to select Corr. Black line, and
then press the Enter key.
3
Press to select None, Weak or Strong, and
or
then press the Enter key.
NOTE:
To use the black streaking reduction
processing, first select Weak. If black streaking is not
reduced, select Strong.
4
Press the Reset key.
The message display returns to the copier basic
screen.
OPERATION GUIDE