Kyocera TASKalfa 181 Operation Manual page 193

Scanner Transmitting :
No Limit
*
Counter Limit
Is not permitted
Counter Limit Default Value :
999.999
Fax Transmission Limit
You can set the limit of count of fax transmission if the optional fax kit is installed.
NOTE:
This item is displayed if Fax Job Accounting in the default settings is set to On. (See page 7-15.).
Limit in use :
Output Limit
Scanner TX
Fax TX
Fax Transmitting :
No Limit
*
Counter Limit
Is not permitted
Counter Limit Default Value :
999.999
OPERATION GUIDE
Limitation
: No limit
: No limit
: No limit
Limitation
3
Press or to select No limit or Counter
limit or Is not permitted, and then press the
Enter key.
If you have selected Counter limit, the Counter
limit Default Value screen is displayed. Proceed to
the next step.
4
Enter the counter limit using the numeric keys.
You can set the limit to 999,999 at the maximum in
1 sheet increments.
5
Press the Enter key.
The message display returns to the Limit in use
screen.
1
Display the Limit in use screen referring to steps 1
to 5 of Registering a New Account.
2
Press to select Fax TX [Fax transm], and
or
then press the Enter key.
3
Press or to select No limit or Counter
limit or Is not permitted, and then press the
Enter key.
If you have selected Counter limit, the Counter
limit Default Value screen is displayed. Proceed to
the next step.
4
Enter the counter limit using the numeric keys.
You can set the limit to 999,999 at the maximum in
1 sheet increments.
5
Press the Enter key.
The message display returns to the Limit in use
screen.
Job Accounting
7
7-7