Kyocera TASKalfa 181 Operation Manual page 109

Capacity for Storage of Temporary Code Jobs
Set the total capacity (upper limit) for storage of temporary code jobs in the hard disk. The actual maximum size,
however, is the size of available hard disk space.
e-MPS
List of VMB
List of Code JOB
e-MPS Configuration
e-MPS Configuration
Back
Back
Temp Code Job Size
Temporary Code Job Size
1550 Mbyte
Total Capacity for Storage of Permanent Code Jobs
Set the total capacity (upper limit) for storage of permanent code jobs in the hard disk. The actual maximum size,
however, is the size of available hard disk space.
e-MPS
List of VMB
List of Code JOB
e-MPS Configuration
e-MPS Configuration
Quick Copy
Temp Code Job Size
Perm Code Job Size
Permanent Code Job Size
1550
OPERATION GUIDE
Mbyte
1
Display the e-MPS screen. (See How to Display the
e-MPS Screen on page 5-4.)
2
Press or to select e-MPS Configuration,
and then press the Enter key.
3
Press or to select Temp Code Job Size
[Temp. code Job size], and then press the
Enter key.
4
Press or to enter the capacity for storage of
temporary code jobs.
You can set the capacity to 0 to 9999 MB.
5
Press the Enter key.
1
Display the e-MPS screen. (See How to Display the
e-MPS Screen on page 5-4.)
2
Press or to select e-MPS Configuration,
and then press the Enter key.
3
Press or to select Perm Code Job Size
[Perm. code Job size], and then press the
Enter key.
4
Press or to enter the total capacity for storage
of permanent code jobs.
You can set the capacity to 0 to 9999 MB.
5
Press the Enter key.
Printing Functions
5
5-9