Stapling Error Detection - Kyocera TASKalfa 820 Operation Manual

Selecting the Printer Settings
4
When you have selected On, press [+]
or [-] or use the numeric keys to enter
the auto continue time.
The auto continue time can be between
0 and 495 seconds, in 5-second
increments.
5 Press [Close] and returns to the Others screen.
6
Press [Close] and returns to the Printer menu screen.

Stapling Error Detection

You can select whether or not to display Out of staples. Add Staples and Press GO when staples
have run out while stapling is performed.
Mode
On
Off
1 Access Others, refer to Automatic Form Feed Timeout Setting on page 2-44.
2 Press  or  to select Finishing Error
and press [Change #].
3 Press  or  to select Staple mode and
press [Change #].
4 Press [On] or [Off].
5
Press [Close] and returns to the Finishing Error screen.
6 Press [Close] and returns to the Others screen.
7
Press [Close] and returns to the Printer menu screen.
2-46
Description
If you select GO, printing is performed without stapling. If you select CANCEL,
printing is canceled.
Printing is performed without stapling.
Auto continue
When error occurs, auto timing for processing can be set.
(0 ~ 495)
30 Seconds
Off
(5)
On
(5)
Printer menu - Others
Others
Default menu Setting mode
Form Feed Time Out 30 Seconds
Resource Protect Permanent
Auto Continue Off
Finishing Error
Printer menu
Finishing Error
Setting Item
Staple Mode On
Printer menu - Others
Back
Change # Service
Value
Change #