Emulation - Kyocera TASKalfa 181 Operation Manual

Printing Functions

Emulation

NOTE:
You can set the emulation for each interface.
Emulation Mode Selection
Emulation modes that can be used with this machine: PCL6, KC-GL, KPDL, KPDL (AUTO), Line Printer,
IBM Proprinter, Diablo 630, EPSON LQ-850
If you set KC-GL, you can set the thickness of the pen and the page size.
If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be automatically
performed according to the print data.
If you set KPDL or KPDL (AUTO), the details of any error that occurs during printing can be printed.
Ready
GO
CANCEL
MENU
Menu
Print Status Page
Interface

Emulation

Interface
Back
Network
USB
Emulation
Back
PCL 6
KC-GL
5-16
1
Press the Print key.
2
Press or to select MENU, and then press the
Enter key.
3
Press or to select Emulation, and then
press the Enter key.
4
Press or to select the desired interface, and
then press the Enter key.
5
Press or to select the desired emulation, and
then press the Enter key.
If you have selected KC-GL, set KC-GL Pen
Thickness.
If you have selected KPDL or KPDL (AUTO), set
KPDL Error Printing.
If you have selected KPDL (AUTO), perform KPDL
(AUTO) Alternative Emulation Selection.
OPERATION GUIDE