Managing Accounts - Kyocera TASKalfa 181 Operation Manual

How to Display the Job Accounting Screen
Use the following procedure to display the Job Accounting screen.
System Menu / Counter:
Counter Check
Print Report
Job Accounting
Enter Pin Code using # key.
Job Accounting :
End
Job Accounting Total
Each Job Accounting TL

Managing Accounts

Registering a New Account
Register a one- to eight-digit ID-code and the limit of use for each account.
Job Accounting :
Each Job Accounting TL
Edit Job Accounting
Job Accountg Def . Set.
Edit Job Accounting :
End
New registration
Delete
OPERATION GUIDE
1
Press the System Menu/Counter key.
2
Press
then press the Enter key.
3
Enter the four-digit management code using the
numeric keys.
The management code at the factory default
setting is 1800 for the 18 ppm model and 2200 for
the 22 ppm model.
NOTE:
The four-digit management code can be
changed. (See Administrator Management Code
Change on page 6-24.)
4
If the management code is accepted, the Job
[ On ]
Accounting screen is displayed.
Next, perform the setting referring to the following
description of each setting item.
1
Display the Job Accounting screen. (See How to
Display the Job Accounting Screen on page 7-3.)
2
Press
[ On ]
and then press the Enter key.
3
Press
then press the Enter key.
to select Job Accounting, and
or
or to select Edit Job Accounting,
to select New registration, and
or
Job Accounting
7
7-3