Registering The Subnet Mask; Registering The Default Gateway - Kyocera TASKalfa 181 Operation Manual

Registering the Subnet Mask

To register the subnet mask, continue the procedure from step 10 above.
TCP/IP Setting
DHCP
IP Address
Subnet Mask
Subnet Mask
0 .

Registering the Default Gateway

To register the default gateway, continue the procedure from step 3 above.
TCP/IP Setting
IP Address
Subnet Mask
Gateway
Gateway
0 .
DHCP Settings
Select whether or not to use the DHCP server. The default setting is On.
Use the procedure below to specify the DHCP setting.
OPERATION GUIDE
0 . 0 . 0
0 . 0 . 0
10
Press the Enter key.
Next, set the subnet mask.
1
Press or to select Subnet Mask, and then
press the Enter key.
2
Use the same procedure as steps 8 and 9 of IP
address setting to input the address.
3
Press the Enter key.
Next, set the default gateway.
1
Press or to select Gateway, and then press
the Enter key.
2
Use the same procedure as steps 8 and 9 of IP
address setting to input the address.
3
Press the Enter key.
4
When you finish making all of the network setting,
press the Reset key.
The message display returns to the printer basic
screen.
1
Display the TCP/IP screen referring to steps 1 to 6
of TCP/IP (IPv4) Setup on page 2-11.
Preparation before Use
2-11
2