Kyocera TASKalfa 181 Operation Manual page 221

Error Message
Memory is full.
OPERATION GUIDE
Checkpoints
Current copying cannot be
processed because the
memory for copying is full
or the number of originals
has reached the limit of
999 pages.
Current printing cannot be
processed because the
memory for printing is full.
Corrective Actions
Select Copy Scanned Image to
output the pages that have been
scanned or select Cancel to delete
scanned data. Another copying job or
scanning cannot be performed until
either of them is selected.
Depending on the copy setting
conditions, only one set of copies
may be output and this error
message may be displayed even if a
multiple number of copies is
specified. In this case, copying
cannot be continued. Press the Enter
key and perform copying operation
again.
If this error occurs frequently, addition
of a memory is recommended
Press the Print key to display the
following messages.
GO: Continues printing. Processed
data will be output and remaining
data will be printed on the next page.
CANCEL: Cancels printing.
RESET: Resets the printer board. In
this case, only the printer functions
will be reset.
Press or to select the desired
processing, and then press the Enter
key.
NOTE:
If you use the RAM disk
function, reduce the RAM disk size. If
this error occurs frequently, addition
of the printer memory is
recommended. For the addition of the
printer memory, contact your service
representative or authorized service
center. For details, refer to.
If the auto continue setting has been
turned on, printing will automatically
resume after a preset period of time.
Troubleshooting
Reference
Page
—
—
9
9-7