Zoom Copying - Kyocera TASKalfa 181 Operation Manual

Zoom Copying

Adjust the magnification to reduce or enlarge the original image. The following zoom options are available.
NOTE:
When magnification ratio is larger than 201%, the images will be rotated 90° counter-clockwise prior to
copying.
Auto Zoom Magnification Selection Mode
Original images are reduced or enlarged according to the selected paper size.
NOTE:
You can set a default setting so that the auto zoom magnification selection mode is selected when you
select a cassette. Refer to Default Magnification on page 6-6.
The procedure for auto zoom magnification selection mode is explained below.
Ready to copy .
Auto % Auto
100%
Ready to copy .
Auto % Auto
129 %
Manual Zoom Mode
With this mode, the magnification can be set between 25 % and 400 % in 1 % increments.
OPERATION GUIDE
Automatically reduces or enlarges the original image
suitably to the selected paper size.
5 × 8 ": 64 %
1/2 1/2
A5: 70 %
1
2
3
1
4
1
5
Press the Copy key.
Place the originals on the platen.
Press the Auto%100% key.
AUTO % is displayed on the message display.
Press the Paper Selection key to select the copy
paper.
The magnification is displayed on the message
display.
Press the Start key to start copying.
Copying Functions
4
4-5