Kyocera TASKalfa 181 Operation Manual page 170

System Menu
Custom Paper Type
Printing onto prepunched paper, preprinted paper or letterhead in the one-sided mode and the two-sided mode
from the same paper source may cause displacement of hole positions or reverse orientations on both sides in
two-sided printing. Set Match Print Direction to match the orientation in one-sided printing and two-sided
printing.
Example: Paper is set as shown in the illustration.
Setting
Match Print
Direction
Fast Mode
NOTE:
Setting of Match Print Direction will decrease the speed of one-sided printing a little.
With the setting of Match Print Direction, set the paper with the side for the first page face-down as shown in
illustration A. (If the optional finisher is installed, set the paper with the side for the first page face-down as
shown in illustration B.)
If the optional finisher is installed, the stapling mode may cause incorrect orientation of printing depending on
the stapling position
Machine Default :
P. Type (Weight)
P. Type (2sided)
Specific P . Type
Specific Paper Type :
Match Print Direction
Fast Mode
*
6-18
One-sided printing
A
: Fast Mode
Two-sided printing
B
1
Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2
Press to select Special P.type, and
or
then press the Enter key.
3
Press to select Match Print Direction
or
or Fast Mode, and then press the Enter key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
OPERATION GUIDE