Continuous Forms With Labels - Epson DLQ-3000+ User Manual

Continuous forms with labels

This kind of continuous paper has one label on each page. This
is different from label paper, which consists entirely of labels.
When priting on continuous forms with labels, the printer must
adjust the height of the print head for the extra thickness of the
labels. Before printing on this kind of paper, measure the label
thickness using the EPSON Label Form Utility. Read the
on-screen instructions on this utility. See page 2-23 for
instructions on accessing the utility.
Caution:
c
Use continuous forms with labels only under normal operating
conditions.
Loading continuous forms with labels
1. Make sure of the following:
Your software settings keep the printing entirely within
the printable area. For information about the printable
area, see the paper specifications on page A-10 and
A-11.
The paper release lever is set to the tractor position.
Note:
In Overlapping Form and
automatically activates the AUTO paper thickness function even
though the paper thickness lever may be set to another position.
modes, the printer
Paper Handling
3
3-31