Table of Contents
Advertisement
Adjusting the Paper Thickness Lever
You can get the best printing quality by adjusting the paper
thickness lever according to the type of paper you use.
Usually, set the paper thickness lever to the AUTO position as
shown below; your printer automatically adjusts itself to the
3
thickness of the paper loaded in the printer.
If you are not content with the printing quality, especially
when using special paper such as multi-part forms, manually
set the paper thickness lever to the appropriate position
referring to the table on the next page.
The higher the number you set the paper thickness lever to, the
wider the space between the platen and print head. If your
printout appears faint or characters seem skipped or missing,
this setting may be too high. On the other hand, if the setting is
too low, your printout may appear smudged, the paper may
not feed correctly, or the ribbon may become damaged.
Use the table on the next page as a guide, but adjust the paper
thickness lever as necessary.
3-5
Paper Handling
Advertisement
Table of Contents
