Table of Contents
Advertisement
Caution:
c
Be sure to remove all protective materials before you turn
on the printer.
There are several models of the printer designed for
different voltages, and it is not possible to adjust the
printer for use at another voltage. If the label on the back
of the printer does not show the correct voltage for your
country, contact your dealer.
Choosing a Place for the Printer
Follow the guidelines below when selecting a location for your
printer.
Place the printer on a flat, stable surface. The printer will
not operate properly if it is tilted or at an angle.
Place the printer where you can easily connect it to a
network interface cable, if necessary.
Leave adequate room around the printer for easy operation
and maintenance, as shown below.
Place the printer near a wall outlet where you easily
unplug the power cord.
printer cover
Setting Up the Printer
1
1-3
Advertisement
Table of Contents
