Table of Contents
Advertisement
Your paper may be the
wrong size or thickness for
the printer.
The sprocket units are
positioned incorrectly for
the width of paper you are
using.
The top-of-form position of your continuous paper varies
when you print several pages.
Cause
The paper size setting in your
application or the printer
driver may not match the size
of the paper you are using.
The printer's page length
setting may not match the
size of the paper you are
using.
Your paper may be too heavy. Make sure that the weight of your
Make sure that the paper size and
thickness are within the specified
ranges. See the continuous paper
specifications on page A-5.
Adjust the position of the sprockets
to remove any slack along the width
of the paper.
Note:
If paper is jammed in the paper path, see
"Clearing a Paper Jam" on page 8-24.
What to do
Check the paper size setting in your
application or the printer driver.
Check the "Page Tractor" setting using
the SelecType mode or the EPSON
Remote! utility. See "SelecType" on
page 4-8, or "Using the printer
utilities" on page 2-22.
paper is within the specified range.
See the continuous paper
specifications on page A-5.
Troubleshooting
8
8-13
Advertisement
Table of Contents
