Epson DLQ-3000+ User Manual page 86

Loading overlapping multi-part forms with labels
1. Make sure of the following:
Your software settings keep the printing entirely within
the printable area. For information about the printable
area, see the paper specifications on page A-13 and
A-14.
The paper release lever is set to tractor position.
The setting in Page Tractor in SelecType 1 matches the
page length of the form you use.
Note:
In Overlapping Form and
automatically activates the AUTO paper thickness function even
though the paper thickness lever may be set to another position.
2. Press the Paper Select button to select
the
3. Follow the instructions in "Loading continuous paper with
the tractor" on page 3-14.
Caution:
c
3-34
Paper Handling
# message appears on the control panel display.
Printing on the edge of overlapping multi-part forms with
labels can damage the print head.
When loading overlapping multi-part forms with labels,
make sure the left edge of the form is no further than 3 cm
to the left of the arrow mark (when facing the back of the
printer).
modes, the printer
and make sure