Table of Contents
Advertisement
The ratio of the cut/uncut length at the perforation should be
between 3:1 and 5:1. And expansion at the perforation (when the
paper is kept flat) should be less than 1mm (0.04 inch) as
following.
3 mm cut
1 mm uncut
If you use continuous paper whose page length (A in the next
illustration) is under 101.6 mm (4.0 inches), make sure that the
length between folds (B) is over 101.6 mm (4.0 inches.)
Width
Length/page
Copies
Total thickness
single sheets
multi-part forms
Weight
single sheets
multi-part forms
Quality
multi-part forms
A-6
Specifications
B
A
101.6 to 406.4 mm (4.0 to 16.0 inches)
101.6 to 559 mm (4.0 to 22.0 inches)
1 original + 6 copies (when Dark is selected in
SelecType 2.)
0.065 to 0.12 mm (0.0025 to 0.0047 inch)
0.12 to 0.53 mm (0.0047 to 0.021 inch)
2
52.3 to 105 g/m
2
40 to 58g/m
(11 to 15 lb) (weight/part
Plain paper, recycled paper, and carbonless
multi-part forms with spot gluing or paper
stapling on both sides
1 mm or more
(14 to 27 lb)
)
Advertisement
Table of Contents
