Table of Contents
Advertisement
This chapter describes how to use optional equipment with
your printer, including the cut-sheet feeder and interface cards.
Cut-Sheet Feeder
The optional cut-sheet feeder C80683
more efficient handling of single-sheet paper, single-sheet
multi-part forms, envelopes, and postcards. You can use the
cut-sheet feeder without removing continuous paper.
See page A-19 for information on the types and quantity of
paper that can be loaded with the cut-sheet feeder.
Installing the cut-sheet feeder
Install the cut-sheet feeder as follows:
1. Make sure the printer is turned off.
2. Assemble the cut-sheet feeder by following the instructions
provided in the documentation that comes with the feeder.
3. Remove the rear paper guide if attached.
Note:
Store the rear paper guide in a safe place; you will need it if you
remove the cut-sheet feeder.
6-2
Using Printer Options
]
gives you easier and
Advertisement
Table of Contents
