Table of Contents
Advertisement
IBM 2391 Plus Emulation Control Codes
This printer emulates the IBM Proprinter with the following commands.
For detailed information, see the IBM 2391 Plus reference manual.
General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U, ESC [ F
Paper feeding:
FF, LF, ESC 5, ESC A, ESC A (AGM*), ESC 0, ESC 1, ESC 2, ESC 3,
ESC 3 (AGM*), CR, ESC ]
Page format:
ESC C, ESC C0, ESC X, ESC N, ESC O, ESC 4
Print position motion:
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J, ESC J (AGM*)
Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I, ESC [d, ESC [I
Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G, ESC H, ESC T,
ESC S, ESC -, ESC _, ESC [ -
Spacing:
BS, SP, ESC [ ¥
Character handling:
ESC 6, ESC 7, ESC [ T, ESC ^, ESC ¥
Bit image:
ESC K, ESC L, ESC Y, ESC Z, ESC [ g, ESC * (AGM*)
Barcode:
ESC [f, ESC [p
* Alternate Graphics Mode
B-6
Command Lists and Character Tables
Advertisement
Table of Contents
