Table of Contents
Advertisement
Using SelecType
This section describes basic operations in SelecType. Follow
these steps to change the default settings:
1. Turn on the printer.
2. Press SelecType to enter the SelecType mode.
Pressing the button once allows you to enter SelecType
Level 1. The display shows:
Pressing the button twice allows you to enter SelecType
Level 2. The display shows:
Note:
Pressing SelecType three times consecutively exits SelecType
and returns the printer to a standby state.
3. Press the r button to enter the setting menu of the selected
level. The display shows the first setting as follows:
When you enter Level 1, the display shows:
When you enter Level 2, the display shows:
Controlling the Printer
4
4-9
Advertisement
Table of Contents
