Table of Contents
Advertisement
The length of the printing on the page does not match your
paper length.
Cause
The paper size setting in your
application or the printer
driver may not match the size
of the paper you are using.
The printer's page length
setting may not match the
size of the paper you are
using.
Printing starts lower on the page than you expect, or the
bottom of a page is printed at the top of the next page.
Cause
The lines-per-page, top and
bottom margin, or form
length setting is incorrect.
What to do
Check the paper size setting in your
application or the printer driver.
Check the "Page Tractor" setting using
the SelectType mode or the EPSON
Remote! utility. See "SelecType" on
page 4-8, or "Using the printer
utilities" on page 2-22.
What to do
Adjust these settings in your
application software, as follows:
If your application software has a
lines-per-page setting, set it to 66
for letter size paper or 70 for A4 size
paper.
If your software does not have a
lines-per-page setting, try decreasing
the top margin or increasing the
bottom margin, or both, until you get
the results you want.
Adjust the form length setting if your
software has this option.
Troubleshooting
8
8-23
Advertisement
Table of Contents
