Epson DLQ-3000+ User Manual page 186

Epson 24-pin dot matrix printer user's guide dlq-3000+
Hide thumbs Also See for DLQ-3000+:
Table of Contents

Advertisement

Printable area
printable area
on a label
Area measurements
Pre-printed Paper
Pre-printed paper is paper with white space in the middle and ruled lines,
letters, or figures printed in the top and bottom margins. The margins are
printed the first time the paper is loaded in the printer, and a document is
printed in the white space the second time the paper is loaded in the
printer. The margin areas are often used for letterheads, borders, and so
on. You can make your own pre-printed paper or you can purchase it.
You cannot preprint in the area with the diagonal shading in the
illustrations below, and can preprint only with colors whose reflectivity is
under 60% (for instance black). Avoid punching holes in the restricted
area below because punctures are also recognized as colors whose
reflectivity is under 60%.
A-14
Specifications
B
A
E
E
E
label
D
A
19 mm (0.748 inch) or more
B
21.2 mm (0.83 inch) or more
C 25 mm (0.984 inch) or more
D
45 mm (1.77 inches) or more
E
3 mm (0.118 inch) or more
F
4.2 mm (0.165 inch) or more
A
C
E
C
D
F
B

Advertisement

Table of Contents
loading

This manual is also suitable for:

P821a

Table of Contents