Table of Contents
Advertisement
Labels
When selecting labels for printing, always choose labels
mounted on continuous backing sheets with sprocket holes for
use with a tractor. Do not use labels on shiny single-sheet
backing, because the backing sheet tends to slip and may not
feed properly.
Caution:
c
Use labels only under normal operating conditions because
labels are especially sensitive to temperature and humidity.
Loading labels
1. Make sure of the following:
Your software settings keep the printing entirely within
the printable area. For information about the printable
area, see the paper specifications on page A-8.
Caution:
c
Printing on the edge of a label can damage the print head.
The auto tear-off function is turned off in SelecType 2.
If you use labels whose backing sheet is exposed, make
sure the paper thickness lever is not set to AUTO. Set it
to the appropriate position according to the table on
page 3-6.
2. Load labels as described in "Loading continuous paper with
the tractor" on page 3-13.
Paper Handling
3
3-25
Advertisement
Table of Contents
