Using The Printer Utilities - Epson DLQ-3000+ User Manual

Note:
If your application does not list a suitable alternative, contact the
software manufacturer to see if an update is available.

Using the printer utilities

The following DOS utilities are included with the printer:
EPSON Remote! allows you to change the printer's default
settings from your computer.
EPSON Label Form enables you to register the label
position and thickness before you use continuous forms
with labels or overlapping multi-part forms with labels.
Installing the printer utilities
Follow the steps below when installing the EPSON Remote!
and EPSON Label Form utilities.
1. Insert the Disk 1 of your printer driver software into your
computer's disk drive.
2. From the DOS prompt, type A:\SETUP. (If you inserted the
driver disk in a drive other than "A", substitute the
appropriate letter.) Then press Enter.
3. Select your printer's name in the Printer Model window and
press Enter. Then C:\EPUTIL appears as the default
directory.
4. Press Enter. All the necessary files are copied to C:\EPUTIL.
2-22
Setting Up Your Software