Table of Contents
Advertisement
After a few seconds, the printer automatically advances the
paper to the loading position. The printer is ready to start
printing.
Caution:
c
Use the knob on the right side of the printer only to clear
paper jams when the printer is off. Otherwise, you may
damage the printer or cause it to lose the top-of-form
position.
Do not open the printer cover while paper is being fed;
otherwise the printer cannot load the paper correctly.
Note:
If the platen rotates but the printer does not load the paper,
completely remove the paper and then insert it all the way into
the printer again.
If you need to adjust the position of the paper after it is loaded,
see "Adjusting the printing position" on page 3-38. To move and
save the loading position of the paper, use the SelecType
"T-Margn Manual F" setting. For more information on
SelecType settings, see page 4-8.
After printing a sheet, the printer ejects it onto the front paper
guide and the Paper Out and Pause lights come on. If you are
printing a multiple-page document, remove the printed sheet
and insert a new sheet into the paper guide. The printer
automatically advances the paper and resumes printing.
Note:
If the printer does not eject the printed sheet, press the Load/Eject
button.
Paper Handling
3
3-9
Advertisement
Table of Contents
