Table of Contents
Advertisement
Adjusting the tear-off position
If your paper perforation is not aligned with the tear-off edge,
you can use the micro-adjust feature to move the perforation to
the tear-off position as follows:
1. Press the Pause button if the printer is printing. Press the
Tear Off button. The Tear Off light comes on.
2. Press the d button to feed paper forward, or press
the u button to feed paper backward, until the paper
perforation is aligned with the tear-off edge.
Note:
The printer has a minimum and a maximum tear-off position. If
you try to adjust the tear-off position beyond these limits, the
printer beeps and stops moving the paper.
3. Tear off the printed pages.
4. When you resume printing, the printer automatically feeds
the paper back to the top-of-form position and begins
printing.
Note:
Your tear-off position setting remains in effect until you change it,
even if you turn off the printer.
Paper Handling
3
3-39
Advertisement
Table of Contents
