Table of Contents
Advertisement
2. Press the Paper Select button to select
the
3. Follow the instructions in "Loading continuous paper with
the tractor" on page 3-14.
Caution:
c
To tear off and eject continuous forms with labels
Always tear off and eject continuous forms with labels by
following the procedure below.
Note:
mode, the Tear Off button is disabled and the Load /Eject
In
button only feeds forms forward.
1. At the back of your printer, tear off the last label form that
has entered the printer.
2. Press the LF/FF button to eject the last label form forward.
3-32
Paper Handling
# message appears on the control panel display.
Printing on the edge of continuous forms with labels can
damage the print head.
When loading continuous forms with labels, make sure the
left edge of the form is no further than 3 cm to the left of
the arrow mark (when facing the back of the printer).
and make sure
Advertisement
Table of Contents
