Caution Labels; Setting Up The Printer - Epson TM-T70-i User Manual

Do not connect a telephone line to the drawer kick-out connector; otherwise the printer and the
telephone line may be damaged.

Caution Labels

The caution labels on the product indicate the following precautions.
CAUTION:
The thermal head can be very hot during printing and immediately after printing. Touching it
may cause burns. Be sure to do cleaning and other work after the thermal head cools down. Also,
be careful of the autocutter blade near the thermal head. See illustration A on page iii for the
location of the thermal head and the autocutter blade.
CAUTION:
When connecting external devices to the USB (including Micro-USB) connectors, follow the
precautions below.
• Confirm the rated current of the external devices by checking the descriptions on the
devices or manuals. Do not use a device whose rated current is unclear.
• Use the UL-approved external devices (only for North American users).
• Connect the external devices only when those total rated current is less than 2.0 A.

Setting Up the Printer

To set up the printer, follow the steps below.
1. Unpacking (See "Unpacking" on page 3.)
2. Installing the printer (See "Installing the Printer" on page 4.)
3. Connecting to a power source (See "Connecting to a Power Source" on page 4.)
4. Connecting to an external device
(See "Connecting to External Devices" on page 5.)
5. Arranging the cables (See "Arranging the Cables" on page 5.)
6. Installing the roll paper (See "Installing Roll Paper" on page 6.)
7. Operation check with test print (See "Test Printing" on page 6.)
Unpacking
The following items are included with the standard specification printer. If any item is
damaged, contact your dealer.
❏
Printer
❏
Power switch cover
❏
AC cable
❑
Roll paper (for operation check)
❑
AC adapter
❑
User's Manual (this manual)
TM-T70-i User's Manual 3