Ibm 2380 Plus Emulation Control Codes - Epson FX-980 User Manual

IBM 2380 Plus emulation control codes

This printer emulates an IBM Proprinter using the commands below. For
detailed information, see the IBM 2380 Plus reference manual.
General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U, ESC [ F
Paper feeding:
FF, LF, ESC 5, ESC A, ESC 0, ESC 1, ESC 2, ESC 3, CR, ESC ]
Page format:
ESC C, ESC C0, ESC X, ESC N, ESC O, ESC 4
Print position motion:
ESC d, ESC R, ESC D, HT, ESC B, VT, ESC J
Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I, ESC [d, ESC [I
Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G, ESC H, ESC T,
ESC S, ESC -, ESC _
Spacing:
BS, SP
Character handling:
ESC 6, ESC 7, ESC [ T, ESC ^, ESC ¥
Bit image:
ESC K, ESC L, ESC Y, ESC Z
Barcode:
ESC [f, ESC [p
Download (only in Draft mode):
ESC =
C-16
Specifications