Using An Optional Cut-Sheet Feeder; Loading Paper In The Single-Bin Cut-Sheet Feeder - Epson FX-880 Quick Reference

Loading paper in the single-bin cut-sheet
feeder
1. Remove the paper guide.
2. Pull both paper set levers all the way
forward until the paper guides retract and
lock open.
3. Insert the stack of paper printable side down
along the left paper guide.
4. Adjust the right paper guide so that it
matches your paper's width.
5. Push back the paper set lever to clamp the
paper against the paper guide rollers.
6. Reinstall the paper guide.
7. Make sure the paper release lever is in the
single-sheet position and the paper
thickness lever is set to 0.
Using an Optional Cut-Sheet
Pull both paper set levers all the way forward.
Insert the stack of paper printable side down.
Single-sheet position
Reinstall the paper guide.
Feeder
7