Displaying And Maintaining An Irf Fabric - HP 5120-24G EI Configuration Manual

Figure 11 Active-state IRF fabric fails before the IRF link is recovered
To manually recover an IRF fabric in Recovery state:
Step
Enter system view.
1.
2. Change the state of the IRF fabric from
Recovery to Active.
After the IRF fabric is recovered, all ports that have been shut down by MAD automatically come up.

Displaying and maintaining an IRF fabric

Task
Display information about all IRF
members.
Display the IRF fabric topology.
Display basic IRF settings.
Command
system-view
mad restore
Command
display irf [ | { begin | exclude |
include } regular-expression ]
display irf topology [ | { begin |
exclude | include }
regular-expression ]
display irf configuration [ | { begin
| exclude | include }
regular-expression ]
26
Remarks
Available in any view
Available in any view
Available in any view