Displaying And Maintaining An Irf Fabric - HP FlexFabric 12900 Series Configuration Manual

Figure 11 Active IRF fabric fails before the IRF link is recovered
IP network
IRF
fabric 1
(Active)
IP network
To manually recover an inactive IRF fabric:
Step
1. Enter system view.
2. Recover the inactive IRF fabric.
After the IRF fabric is recovered, all ports that have been shut down by MAD come up automatically.

Displaying and maintaining an IRF fabric

Execute display commands in any view.
Task
Display information about all IRF members.
Display the IRF fabric topology.
Display IRF link information.
Display basic IRF settings.
Display the load sharing mode for IRF links.
Display MAD configuration.
IRF fabric 2
(Recovery)
IRF fabric
1 fails
IRF fabric 1
because
fails before the
IRF link is
physical
recovered.
problems
IRF fabric
1 fails
because
physical
problems
IP network
IRF fabric 2
(Active)
of
IP network
IP network
IRF fabric 2
(Active)
of
IP network
Command
system-view
mad restore
Command
display irf
display irf topology
display irf link
display irf configuration
display irf-port load-sharing mode [ irf-port
[ member-id/port-number ] ]
display mad [ verbose ]
31
Execute the mad
restore
command on
IRF fabric 2
IP network
IRF
fabric
Repair IRF links
and IRF fabric 1,
and reboot IRF
fabric 1
IP network