Pick-Up Fails (Cassette 1) - Canon CLC5000 Service Manual

4.1.50 Pick-up fails (cassette 1).

1) Does the "ADD PAPER" message remain ON?
YES: See "The 'ADD PAPER' message fails to turn OFF."
2) Slide out and then in the cassette. Are the sounds of lifter lowering
NO:
Drive belt (displacement)
3) Is the drive belt attached properly?
NO:
Gear
4) Is the drive from the pick-up motor transmitted to the cassette
NO:
Pick-up/separation/feeding roller
5) Does the pick-up/separation/feeding roller rotate?
YES: • Check the pick-up/separation/feeding roller.
Drive clutch, Solenoid
DC controller PCB
6) Does the voltage between the following terminals on the DC con-
YES: Check the wiring; if normal, replace the solenoid and clutch.
NO:
COPYRIGHT © 2001 CANON INC.
CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
and of the lifter motor turning heard?
See "The lifter fails to rotate."
Re-attach it.
holder through the gears?
Check the gears.
• Check the guide plate for deformation and obstacles.
troller PCB change at the pick-up timing after the start key has
been pressed?
• Cassette 1 Pick-Up Roller Releasing Solenoid (SL9)
J5503A-16 and J5503A-15
• Cassette 1 Pick-Up Roller Drive Clutch (CL2)
J5503A-8 and J5503A-7
Replace the DC controller PCB.
2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
5-155