Canon CLC5000 Service Manual page 333

CHAPTER 3 INSTALLATION
Step
12 Fix the control card to the control panel
using four self-tapping screws.
At this time, slide in and out a card, and
fix the control card where the card
slides in and out easily.
Further, check that the printer connector
is centered over the hole.
13 Fix the grounding wire of the control
card to the control panel.
14 Disconnect the short connector for the
control card behind the control panel;
then, connect the connector (4P) of the
control card.
3-32
Work
COPYRIGHT © 2001 CANON INC.
Remarks
Screws
Screw
F03-600-07
Screw
Grounding wire
F03-600-08
Control panel back cover
Short connector
F03-600-09
Control panel back cover
Control card connector
F03-600-10
2000 2000 2000 2000
Control Card V
Screw
CANON CLC5000 REV.0 JAN. 2001