Canon CLC5000 Service Manual page 326

Step
14 Press the
DISP
ADJUST
FUNC
OPTION
TEST
REG-APER
15 Press
position correction.
Before executing 'REG-
APER', check to make sure that
the transfer unit is at locking
position.
16 Press the Reset key twice to end service
mode.
17 Pull out the cover switch actuator, and
close the front cover.
18 Turn off and then on the power switch,
and wait until warm-up ends.
19 Select 'ADJSUT > PASCAL' in service
mode; then, set
Press the Reset key twice to end service
mode.
20 In user mode, execute the following:
auto gradation correction > full
correction. (Pick-up must be from an A3
or B4 cassette; otherwise, feed A3/B4
paper using the multifeeder.)
COPYRIGHT © 2001 CANON INC.
Work
key to bring up the 2nd screen of 'INSTALL'. Press
<M>
INSTALL
COUNTER IMG-REG
0
REG-APER
0
RECV-Y
0
to execute image
PASCAL to '1'.
2000 2000 2000 2000
<S> <R>
2/4
LSNS-KIL
1
RECV-M RECV-C
0 0
F03-304-08
CANON CLC5000 REV.0 JAN. 2001
CHAPTER 3 INSTALLATION
Remarks
IMG-REG to select '1'.
<P> <F>
RECV-K
0
3-25