Correcting Skew Movement(Slope Of The Registration Roller Unit) - Canon CLC5000 Service Manual

CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS

2.7.22 Correcting Skew Movement(slope of the registration roller unit)

If you must correct skew movement after
replacing the registration roller unit, per-
form the following:
1) Remove the transfer right cover and the
front right cover.(CLC1000 Service
Manual>Chap 4>I. "External Control
System")
2) Loosen the two mounting screws [1] on
the registration roller unit.
3) Adjust the screw [2] used to position
the fixing plate.
• The leading edge of paper will be
toward the front in relation to the
movement of feeding (CW).
Transfer belt
4) After making adjustments, fully tighten
the screw loosened in step 2).
5-44
Conceptual diagram
cw
ccw
F05-207-25
COPYRIGHT © 2001 CANON INC.
F05-207-23
F05-207-24
Registration
roller unit
Paper
2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
[1]
[2]
ccw cw
Screw 2