Installing The Control Card V - Canon CLC5000 Service Manual

CHAPTER 3 INSTALLATION

6 Installing the Control Card V

Be sure to disconnect the power plug before starting the work.
Step
1 Open the copier's front cover (left, right).
2 Remove the screw, and remove the
hopper assembly right cover.
3 Remove the screw, and remove the
hopper assembly left cover.
4 Remove the two fixing screws from the
hopper assembly.
5 Holding the right and left grips, pull out
the hopper assembly to the front.
6 Remove the copier's left side plate, and
remove the three screws used to fix the
control panel in place.
3-30
Work
COPYRIGHT © 2001 CANON INC.
Remarks
Left cover
Screw
Fixing screws
F03-600-01
Hopper assembly
Grip
F03-600-02
Screws
F03-600-03
2000 2000 2000 2000
Screw
Right cover
Grip
CANON CLC5000 REV.0 JAN. 2001