CHAPTER 2 NEW FUNCTIONS
4.5.3 Transfer Belt Unit
a. Removing the Transfer Blade
1) Open the front cover, and slide out the
transfer unit assembly to the front.
2) Remove the two screws [1], and detach
the transfer unit cover [2].
3) While pulling the lever [3] found on the
bottom of the transfer unit assembly, set
the transfer assembly releasing lever
[4].
4) Turn the cam [5] by hand so that the
belt unit [6] will be in UP position.
2-66
COPYRIGHT © 2001 CANON INC.
[1]
[2]
F02-405-35
[4]
F02-405-36
[6]
F02-405-37
2000 2000 2000 2000
CANON CLC5000 REV.0 JAN. 2001
[1]
[3]
[5]