Canon CLC5000 Service Manual page 680

CCD-DISP
Use it to switch the display data for the following in service mode:
'FUNC>CCD'
0: indicate display in normal mode (default)
1: indicate data in precious metal mode
TARGET
Use it to display the shading adjustment correction value (target value of
point B).
BLUE
GREEN
RED
GAIN-UP
Use it to indicate the setting of the gain-up mode (precious metal mode) for
the analog processor PCB
Remarks 0: normal mode
255: precious metal mode
OFFST
Indicates the value for offset level adjustment of the odd bits of the CCD.
BLUE
GREEN
RED
BALANCE
Indicates the value for balance level adjustment of the even and odd bits of
the CCD.
BLUE
GREEN
RED
GAIN
Indicates the value for gain level adjustment of the CCD.
BLUE
GREEN
RED
Scaning lamp
COPYRIGHT © 2001 CANON INC.
Use it to indicate the data of BLUE.
Use it to indicate the data of GREEN.
Use it to indicate the data of RED.
Indicates the data for blue of the offset level.
Indicates the data for green of the offset level.
Indicates the data for red of the offset level.
Indicates the data for blue of the balance level.
Indicates the data for green of the balance level.
Indicates the data for red of the balance level.
Indicates the data for blue of the gain level.
Indicates the data for green of the gain level.
Indicates the data for red of the gain level.
CCD
LAMP
2000 2000 2000 2000
AMP A/D
OFST Point A
BALANCE
GAIN
GAIN-UP
F00-400-12
CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
Shading
correction
B (TARGET)
S-91