Canon CLC5000 Service Manual page 635

SERVICE MODE
PJDA-XS/-XE/-YS/-YE
Fine-adjusts the area from which measurements are taken for original detec-
tion when the original detection mechanism is on with the projector in use.
• Use it also for the read area when the original detection mechanism is off
in copyboard mode.
• The area for the standard value (0) is 5 mm inside the Fresnel lens.
Settings range –99~+99
YS, YE
(–6.3~+6.3mm)
Unit: 0.06mm (approx.)
XS, XE
(–10.9~+10.9mm)
Unit: 0.11mm (approx.)
Standard: 0 (on copyboard glass)
PJCAR-X/-Y
Use it to adjust the film reading range when the original detection mecha-
nism is off with the auto changer in use.
Settings range –100~100
Standard: 0
PJDA affects the area from which measurements are taken not the area from
which measurements have been taken. To erase the black frames on copies or
REF.
decrease the width of such frames, adjust YE of DA-XS under DOC-REC.
S-46
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001